PROMASEAL® Intumescent Acrylic Sealant Grey

ADVANTAGES

  • Up to 240 minutes fire resistance (BS476 Part 20)
  • Excellent adhesion to most surface types
  • Non hardening, tack free, air curing sealant
  • Can be over painted

 

 

A fire stopping intumescent acrylic sealant for walls and floors.

  • Seal joints of up to 50mm wide.
  • Allows for ± 10% movement
  • Tested to BS and EN Standards
  • Up to 240 minutes fire resistance
  • Certifire Approval
  • CE Marked
  • Excellent adhesion to most surface 
  • Non hardening, tack free, air curing sealant

More Information

Promat Part No Colour Volume Qty (per pack) Weight (kg)
4009034 Grey 310 12 6.5 


i  Request Samples Buy Online

Applications

Performance
< #Back#

Tested to  BS 476: Part 20

Also tested to EN 1366-3 and EN 1366-4

Tested to  BS 476: Part 20

Also tested to EN 1366-3 and EN 1366-4

Installation
< #Back#

PROMASEAL® Sealants will adhere to most construction materials. Very porous surfaces may need to be wetted with clean water to prevent too rapid drying of the sealant before proper cure.  If in doubt, the sealant should be applied to a small length of joint and examined, or the Promat Technical Services Department should be contacted.

All surfaces should be clean, dry, oil, dust and grease-free and loose paint should be removed from steel. 

It is advisable to tool the sealant firmly against the joint faces and the sealant can be dressed off with a wetted trowel. Where there is a fire risk on both sides of the substrate, the sealant should be installed on both sides.

Can be overpainted after approximately 48 hours (dependent on ambient conditions). Consideration should be given to the flexibility of the finished painted coat when movement is expected.

PROMASEAL® Sealants will adhere to most construction materials. Very porous surfaces may need to be wetted with clean water to prevent too rapid drying of the sealant before proper cure.  If in doubt, the sealant should be applied to a small length of joint and examined, or the Promat Technical Services Department should be contacted.

All surfaces should be clean, dry, oil, dust and grease-free and loose paint should be removed from steel. 

It is advisable to tool the sealant firmly against the joint faces and the sealant can be dressed off with a wetted trowel. Where there is a fire risk on both sides of the substrate, the sealant should be installed on both sides.

Can be overpainted after approximately 48 hours (dependent on ambient conditions). Consideration should be given to the flexibility of the finished painted coat when movement is expected.

Related Products
Documents
< #Back#

Declaration of Performance

Declaration of Performance

Product Data Sheets

Product Data Sheets

Safety Data Sheets

N.B. Documents shown with a padlock: please register or log in to your Website Account above, to access document.

Third Party Certification

Declaration of Performance

Declaration of Performance

Product Data Sheets

Product Data Sheets

Safety Data Sheets

N.B. Documents shown with a padlock: please register or log in to your Website Account above, to access document.

Third Party Certification

Find a stockist near you